Pre-Black Friday Sale, ends Wednesday, Nov 25 11:59 PM PT15% Off Car Covers · Code: DS15
Home›Journal›Vehicle Guides
Vehicle Guides

Chevrolet Fleetmaster Cover — 1946–1948 Postwar Body Styles and Classic Storage Guide

NOAA weather station data from the California coast — stations from Morro Bay to Malibu — records daily relative humidity swings of 30 to 40 percentage points through the storage season. Morning readings in October reach 85 to 95 percent relative humidity. By mid-afternoon, those same stations record 50 to 60 percent. For stored classics in coastal garages, this cycling is not background noise. For a 1946–1948 Chevrolet Fleetmaster, it is the primary threat to two materials that cannot tolerate sustained moisture cycling without degradation: 75-year-old nitrocellulose lacquer and the hygroscopic ash, maple, and birch wood panels that define the Fleetmaster Station Wagon.

DS
DaShield Engineering Team
Materials Engineering · Buena Park, California
schedule~10 min calendar_todayMay 2026

NOAA weather station data from the California coast — stations from Morro Bay to Malibu — records daily relative humidity swings of 30 to 40 percentage points through the storage season. Morning readings in October reach 85 to 95 percent relative humidity. By mid-afternoon, those same stations record 50 to 60 percent. For stored classics in coastal garages, this cycling is not background noise. For a 1946–1948 Chevrolet Fleetmaster, it is the primary threat to two materials that cannot tolerate sustained moisture cycling without degradation: 75-year-old nitrocellulose lacquer and the hygroscopic ash, maple, and birch wood panels that define the Fleetmaster Station Wagon.

The Fleetmaster ran for exactly three model years — 1946, 1947, and 1948 — before Chevrolet retired the name with the 1949 redesign. In that window, Chevrolet built five distinct body styles using stored 1942 wartime tooling resumed post-war: a 2-door sport coupe, a 4-door sport sedan, a convertible, a 2-door Town Sedan, and the Fleetmaster Station Wagon, universally known as the "woody" wagon. These are not cosmetic variations on a common body. The coupe's lower fastback roofline, the sedan's upright C-pillar, and the woody wagon's tall squared body sides are geometrically distinct cover requirements. A cover sized generically for "postwar full-size Chevrolet" does not correctly fit all five — and on a vehicle whose lacquer paint is 75 years old and whose woody wagon wood panels may be original, a cover that does not fit is not neutral. It causes harm.

The California coastal humidity data establishes why breathability is the non-negotiable requirement for these materials.


01Where the Fleetmaster Came From: WWII, Tooling Continuity, and the Postwar Restart

Chevrolet's 1942 model year was cut short when civilian automobile production ceased for wartime manufacturing. The 1942 body tooling was placed in storage, not scrapped. When production resumed in late 1945 and early 1946, Chevrolet returned to the existing 1942 dies rather than engineering an entirely new body.

That decision is why the 1946–1948 Fleetmaster is dimensionally the same car as the 1942 Chevrolet — same body panels, same roofline geometry, same overall length of approximately 196 to 198 inches. A correctly sized 1942 Chevrolet cover of the matching body style fits a 1946–1948 Fleetmaster. The Fleetmaster's paint — nitrocellulose lacquer — is also a prewar technology resumed along with the body tooling.


02Five Body Styles, Three Distinct Roofline Geometries

The Fleetmaster's five body styles are not interchangeable for cover purposes. The differences that matter are roofline height, C-pillar geometry, and rear deck configuration.

The 2-Door Sport Coupe. The fastback-influenced roofline drops from the B-pillar at a pronounced rearward angle — a noticeably lower and longer rear section than the upright sedans.

The 4-Door Sport Sedan. The sport sedan's upright C-pillar terminates into a conventional step-down trunk lid, creating more vertical height at the rear than the coupe. A cover patterned for the coupe tents at this transition; a sedan cover has excess depth on the coupe's lower profile.

The Woody Station Wagon. The tallest and widest body style in the lineup. The wagon's squared roofline carries more vertical height than either the coupe or sedan, and the body sides incorporate structural ash framing with maple or birch infill — real wood, not decorative trim applied to metal. A cover that fits the coupe or sedan will not correctly drape the wagon's taller, more squared rear section.

The Convertible. Three distinct configurations — top up, top down with boot, top down without boot — each producing a different body height. A convertible-specific template accounts for these configurations.

The 2-Door Town Sedan. A profile closer to the sport sedan than the coupe, most often confused with the sport sedan at checkout. The dimensional differences are enough to produce fit issues at the rear section.

Selecting "Fleetmaster" without specifying body style routes to a default template that fits one body correctly and the others inadequately. The difference in physical fit is most visible at the rear roof section and lower body sides.


03Nitrocellulose Lacquer: The Softest Paint in the DaShield Catalog

Every Fleetmaster left the factory with nitrocellulose lacquer — the softest paint system applied to US production automobiles. Modern two-stage basecoat/clearcoat typically achieves pencil hardness of 2H to 4H after cure. Nitrocellulose lacquer on a 75-year-old vehicle falls significantly below both that reference and the synthetic enamel that replaced it in the 1950s. Original 1946–1948 lacquer is soft enough that a fingernail can scratch it with modest pressure.

Any cover with non-woven polypropylene on the inner surface — the material used in most commodity covers — drags against paint rather than sliding. On modern clearcoat this produces slow cumulative swirl marks. On 1940s lacquer, the same drag produces visible contact marks in a single season, and linear scratches under wind movement if the cover shifts against the body.

Lacquer respray from a specialist runs $15,000–$40,000. Paint correction on original lacquer runs $600–$2,000. A woven face fabric glides across the paint surface rather than catching at the fiber level — on lacquer from 1946–1948, this distinction is the difference between protection and damage.


04The Woody Wagon: Highest-Value Body Style, Most Demanding Storage Requirements

The Fleetmaster Station Wagon is the most valuable body style in the 1946–1948 lineup and the most demanding to store correctly. Woody wagon restorations run $60,000–$200,000 at the top end; wood-only restorations are $20,000–$60,000. Chrome re-plating on the full Fleetmaster package adds $2,000–$6,000 separately.

The wood moisture cycle. Ash, maple, and birch are hygroscopic — they absorb atmospheric moisture when humidity rises and release it as conditions change. In a garage without active climate control, this cycle runs continuously through the storage season. A breathable woven cover allows vapor released by the wood to pass through the fabric and escape. A non-breathable cover prevents that vapor from escaping. Moisture accumulates under the cover, raising relative humidity at the wood surface above ambient. At the joints between wood members and at edge grain where varnish has worn away, this sustained high humidity drives checking.

Checking is the fine surface cracking that begins at unprotected wood grain and propagates inward. In early stages it is a surface finish problem — if caught and revarnished, structural integrity is preserved. If checking advances while the wood remains in humid conditions, the cracking propagates into the wood fiber itself. By the time structural checking is visible, panel replacement — not refinishing — is the repair.

Chrome preservation. The Fleetmaster's full-width front grille, dual-bar bumpers, window surround trim, and hood ornament used a copper-nickel-chromium plating process. A cover that traps moisture against the chrome accelerates pitting initiation and propagation. Chrome re-plating runs $2,000–$6,000 for the full Fleetmaster package. The cover decision determines whether that expense is deferred or necessary.


05Body-Style-Specific Template Selection at Checkout

Select the body style — coupe, sport sedan, Town Sedan, convertible, or station wagon — rather than the model name alone.

Coupe: the lower fastback roofline requires less fabric depth at the rear C-pillar than the sedan. A sedan template on the coupe produces excess fabric that pools at the lower body sides. Sport sedan and Town Sedan: the upright C-pillar and step-down trunk lid require adequate depth at the rear roof-to-trunk transition; a coupe template tents at this point. Woody wagon: the tall squared roofline and wider rear body section require a wagon-specific template — a sedan template pulls taut across the roof and is simultaneously insufficient at the lower body sides. Convertible: specify the convertible variant; the template accounts for variable roofline configurations.

All 1946–1948 Fleetmaster body styles share the same body tooling as the 1942 Chevrolet of the matching body style. A 1942 Chevrolet owner can select the Fleetmaster template of the correct body style and receive the correct fit.


06DaShield Ultimum for the Fleetmaster

The DaShield Ultimum is designed in Buena Park, California. At $229.99 for a standard car size, the Ultimum is a multi-layer woven fabric — not a non-woven polypropylene construction.

The woven face provides the non-abrasive surface contact required for nitrocellulose lacquer — the fiber structure slides rather than drags. On a vehicle where paint correction costs $600–$2,000 and a full respray costs $15,000–$40,000, this is not a minor specification. The woven construction is also breathable: water vapor passes through the fabric rather than condensing under it, allowing the woody wagon's wood panels to complete their moisture exchange cycle and preventing sustained humid microenvironments at the chrome and lacquer surfaces.

The Ultimum carries a Lifetime warranty. The primary benefit is the material specification: woven face, breathable construction, body-style-specific template. For Fleetmaster owners in actively climate-controlled storage year-round, the DaShield Satin is an alternative. In any space where temperature and humidity cycle with ambient conditions — garage, barn, storage unit — the Ultimum is the correct specification.


07What Goes Wrong With the Wrong Cover

A waterproof nylon or polyethylene cover on a stored Fleetmaster produces two damage categories. The first is moisture: the waterproof outer layer traps condensation from chrome, vapor from wood panels, and overnight humidity cycling against lacquer — chrome pitting propagates, wood panels absorb moisture without the drying cycle completing, and lacquer sits in a sustained humid microenvironment. The second is mechanical: a cover that does not fit the specific body style applies contact pressure where fabric pulls taut. On nitrocellulose lacquer, sustained contact pressure over a storage season produces permanent marking, and wind movement introduces linear scratches not recoverable without correction.

The correct answer is a body-style-specific woven cover. A generic cover fits no Fleetmaster body style correctly. A waterproof cover solves the wrong problem.


Frequently Asked Questions
What is the difference between the Fleetmaster and the Stylemaster, and does it affect cover selection?

The Fleetmaster was Chevrolet's top trim line for 1946–1948; the Stylemaster was the base trim. The two lines shared the same body platforms, dimensions, and roofline geometry — the Fleetmaster distinction was in interior equipment, exterior chrome detail, and trim designation. For cover purposes, a Fleetmaster and a Stylemaster of the same body style and model year are the same car dimensionally. Select by body style — coupe, sedan, convertible, or wagon — rather than by trim level.

The Fleetmaster Station Wagon has wood body panels and painted steel sections. Does the cover handle both materials?

The woody wagon's cover challenge is that the same cover must protect nitrocellulose lacquer on the painted steel sections and breathe correctly for the hygroscopic wood panels simultaneously. A non-breathable cover fails the wood panels regardless of how it handles the paint. A woven breathable cover addresses both: it allows the moisture exchange cycle of the wood panels to complete while providing a non-abrasive contact surface for the lacquer. There is no cover material that is correct for the wood and incorrect for the lacquer, or correct for the lacquer and incorrect for the wood, when both requirements are breathability and non-abrasion — those requirements point to the same fabric specification.

My Fleetmaster has been resprayed in modern basecoat/clearcoat rather than original lacquer. Does that change the cover recommendation?

Modern clearcoat is harder than original nitrocellulose lacquer, which reduces the sensitivity to fabric contact. If your Fleetmaster has been fully resprayed in a modern paint system and is stored in a climate-controlled environment, the SoftTec Satin is a viable alternative. If the vehicle has any original or period lacquer remaining — including in partially resprayed areas — the recommendation remains the Ultimum. The breathability requirement does not change regardless of paint type if the storage environment cycles through ambient temperature and humidity.

Is the 1942 Chevrolet cover the same as the Fleetmaster cover?

Yes, for matching body styles. The 1946–1948 Fleetmaster production used the same body dies as the 1942 Chevrolet — civilian production was halted mid-1942 and resumed post-war on the stored prewar tooling. The body geometry, overall dimensions, and roofline profiles are identical between a 1942 Chevrolet and a 1946–1948 Fleetmaster of the same body style. A 1942 Chevrolet owner can order a Fleetmaster template of the matching body style and receive the correct fit.

How do I prevent chrome pitting on a stored Fleetmaster?

Two cover-related factors affect chrome condition in storage. The first is breathability: a cover that allows moisture vapor to escape rather than trapping it against the chrome surface reduces the sustained wet conditions that accelerate pitting initiation and propagation. The second is fit: a cover that does not tent or pull away from the body sides maintains coverage over the chrome trim strips and bumper ends rather than leaving gaps where moisture accumulates without the cover's protection overhead. Chrome re-plating for the full Fleetmaster package — grille, bumpers, window trim, and hood ornament — runs $2,000–$6,000, making the cover decision relevant well before any plating work is necessary.